Frequently Asked Questions

Do I need a Fire Risk Assessment for my business?

If you're an employer and/or have members of the public visiting your premises, the answer is yes!

A Fire Risk Assessment is a legal requirement under the Regulatory Reform Fire (Safety Order) 2005 and is carried out to identify and minimise the risk of fire.

If you employ more than 5 people there is a legal requirement for the fire risk assessment to be documented.

Landlords of HMOs also require a Fire Risk Assessment and this is often requested by the Local Authority.

Fire Risk Assessments can be complex. Only persons who are suitably qualifed, experienced and knowledgable should undertake this task.

 

Can I complete my own Fire Risk Assessment?

If you are competent in carrying our Fire Risk Assessments then yes, you can complete your own.

As legislation changes from time to time, anyone who undertakes fire risk assessments must be familiar with regulations and how this applies to the specific premises and business operations.

Competency is defined as knowledgeable, experienced and qualified.

It is a criminal offence to carry out a Fire Risk Assessment if you are not competent to do so.

 

How often does a Fire Risk Assessment need to be done?

Your fire risk assessment report will have a suggested review date which is usually 12 months from the date of the last assessment.

If any of the following applies, a review should be carried out sooner:

  • changes to the building layout have been made
  • a change in building use
  • a change of occupancy
  • a fire has occured
How often does my fire alarm need testing?

A commercial fire alarm system should be serviced by a competent fire alarm engineer every 6 months to ensure the system is in good working order.

During the service, the engineer will test the alarm panel battery and all devices  which will helps prevent faults inbetween visits.

In addition to the 6 monthly service carried out by a qualified engineer, weekly testing should be carried out in-house and any faults reported to your servicing company so they can be rectified promptly.

How often do my emergency lights need to be tes

Emergency lights should be tested by a competent individual every 12 months to ensure they are in good working order.

A 3 hour duration test is required to comply with BS 5266. During this inspection, the power to the emergency light fittings will be temporarily switched off to emulate a complete power failure.

Luminance levels are checked throughout the test period to ensure adequate levels are provided for the duration of the test. 

In addition to the annual test carried out by a qualified electrician, monthly testing should be carried out in-house and any faults reported to your servicing company so they can be rectified promptly.

How often do my fire extinguishers need to be checked?

Fire extinguishers should be serviced by a competent person annually.

It is also recommended that regular visual inspections are carried out to ensure the extinguishers are in the correct locations and have not been tampered with so if they are needed in an emergency situation, they will operate as required.

Any issues or discharged fire extinguishers must be reported to the relevant person and a service visit arranged with your fire extinguisher servicing company.

Do my employees need fire training?

All employees should receive fire awareness training so they are confident to identify and report any potential fire risks and understand the procedures required in the event of a fire or an an evacuation.

There should be at least 1 designated and trained fire warden in the workplace who will be responsible to facilitate a safe evacuation of the premises in an emergency.

Do I need fire safety signage?

Yes, fire safety signage is required to comply with fire regulations.

There are several types of signage which include:

  • Fire Exit and Escape Route Signs - help direct people to the nearest exit
  • Fire Action Notices - these give specific instructions to people in the event of a fire
  • Fire Door Signs - give instructions such as Keep Clear, Keep Shut, Keep Locked
  • Assembly Point Signs - Clearly identifies where to meet following an evacuation so all building users and visitors can be accounted for
  • Fire Extinguisher ID Signs - shows users how to use fire extinguisher correctly

Having adequate fire safety signage is essential for a quick and safe evacuation.

We recommend photoluminescent signs so they are clearly visible in the event of power failure during limited natural lighting.

Do I need an electrical test certificate for my business?

An EICR or electrical test is required to ensure your fixed wiring is compliant with regulations and is in a safe condition.

Electrical safety is essential to prevent injury, fires and minimises disruption to your business operations caused by faulty electrical equipment.

An EICR certificate or Electrical Installation Condition Report is usually valid for 5 years.

Are foam fire extinguishers banned in the UK?

No, foam fire extinguishers are not banned in the UK but some of the older ones should no longer be in circulation because of the chemical compounds, PFOS and PFOA, found in them.

Foam extinguishers continue to be the most suitable type to use on Class B fires ( flammable liquid) and work by smothering the flames and starving the fire of oxygen.

The fire safety industry is taking steps to a greeener way of tackling fires and reputable companies like ourselves have transitioned to replacing AFFF (aqueous film forming foam) extinguishers with fluorine free foam extinguishers when they next discharge test is due.